Contact Leeway Workshop, LLC

If you have questions, please feel free to send them in. Email is our preferred choice for contact. We don't have someone answering the phone, though we will if we happen to be there. No phones in the shop. Far too noisy. Some questions can easily be answered via email with a link or two. Others may need more information from you to resolve correctly. Every email is answered.

 

Current Lead Time:

Attention

The lead time for a new Shark Guard order is probably around 4 weeks.
This is due to order volume. Lead time does fluctuate. It is an estimate. Splitter or riving knife orders would be in about a week. We do have a small supply of these in stock now, so it would take just a little time to finish them out. Brackets and accesories may take about the same time. There is no need to use Paypal to get on the waiting list for Shark Guards. Just send an email with the model and options you would like. That will secure you a spot on our waiting list. I will confirm this via email.
I prefer this method. We could settle up just before your order ships. Feel free to ask about the status of your order or the availability of your particular model or possible lead time at anytime via email.

What's New:

New

 

We will be adding a new product very soon. It will be dust shoes for CNC routers. Stay tuned for information about those in the coming weeks if you are interested. We still have R&D in the works for other upgrades and products and table saw models. If you want to get on the waiting list for a Shark Guard, just send an email with the details of the order you would like.

Thank you for your interest.

Product Disclaimer

All of the items that you get from us are guaranteed to be of good quality, made from the best material available. If you aren't pleased with the condition of what we send you, you get your money back upon return. As with any aftermarket accessory,

YOU

must decide if these are the right additions or modifications for your comfort and safety. There is no way to use your table saw and be RISK FREE. The items that we make are merely safety aids. They will NOT PREVENT injury. They are a deterant to it.

Saws are very dangerous machines. Saws can KILL or MAIM you.

These accessories may not comply with rules and regulations in your area. You must decide for yourself whether to use these accessories or not. It is your safety that is at risk when using any power tool or accessory. Since we cannot be there for each and every setup and cut that you make, we cannot be held responsible for any accidents that occur as a direct result of any information or equipment that you receive from us or this website. You should familiarize yourself with saws and safety techniques in order to use it sucessfully.

Any responsibility for the use of this product(s) ultimately rests on your own shoulders.

Ordering anything from us is an acknowledgement that you understand these risks and responsibilties and that you are willing to accept the consequences of using them. If you are un-certain as to WHO is RESPONSIBLE for the setup and usage of any of these accessories,

DO NOT PURCHASE THEM.

Address:

 

Leeway Workshop, LLC

 

Attention: Lee Styron
PO Box 1431
Robertsdale, Alabama USA
36567

Directions

Our shop is located in South Alabama and is in a suburb of Robertsdale called Elsanor. Our shop is not a store front. Business must be done by Mail or Email.

 

Email:

 

For product information, support or assistance:

leesty@gulftel.com

Telephone:

 

1-251-947-4658


There is no one here to answer the phone. We will answer it if we can, but the best way to contact us is through Email. If we do not answer the phone, please leave a message and we will return your call.
Thank you.

 

Contact Information

 

American Flag Waving Shark Logo

 

We answer all emails, but may not be able to answer the phones. No phones in the shop. If you need to contact us, email is the best route. We check it many times a day. It is better for us this way so that we may send links and information about your communication as well as have a record of the conversation. This allows us to give much more accurate information rather than relying on memory for names, saw types, models, features, orders, parts etc. The task of producing so many different models is complicated itself. We try to alleviate some of that complication through written communication.

While we do not mind at all to communicate over the phone, most of the time when we try to call back, we must leave a voicemail as well. When we do get the person on the phone, it is sometimes difficult to communicate without both parties looking at the same page on the website. Designs, models and saw types require completely different information. Email is by far the best choice to convey this information. Thank you.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Welcome
Welcome
Welcome
themed object
Home of the Shark Guard