Leeway Workshop, LLC
Home of the Shark Guard
Designed and built in the USA

Replacement and Spare Parts Order



Below are Shark Guard parts and accessories that you may be interested in.
If buying more than one item, you can just email your needs to us and
we will work out a total cost for you.


Lead time on parts is usually about a week and can happen
the same day, depending on availability.

 


 

Item #1 - SGK1 Replacement Dust Ports $25

These dust ports are designed for the SGK1.
If you want to swap out a dust port to try a different size,
then this is where to order.
Please note that additional shipping costs may be needed for this item.
If replacing due to a failure on the guard, Just let us know.
This link will show you the steps for Replacing a dust port on an SGK1.

 

Sizes

 

 

3 Dust Port sizes - 2.5 in - 3 in - 4 in 2.5 Inch Dust Port

 

 

 


 

 

 

Item #2 - Both Sides - Left and Right- Lexan parts only! $40

This is both side parts milled and ready to replace on your SGK1 should the need arise.
We often have seconds available in these with minor scratches or cosmetic imperfections only.
Those would be half price.
Please note that additional shipping costs may be needed for this item.

 

PayPal - The safer, easier way to pay online!

 

3 Dust Port sizes - 2.5 in - 3 in - 4 in Both left and right SGK1 sides

 

 

 


 

 

 

Item #3 - SG3D SS Hardware Kit $25

This is the hardware needed for the for the SGk1 to update to the latest version of the guard.
This is the hardware only. It includes the barrel bolts, roller, standoffs, screws, tail plate and tail hook safety latch.
These parts are black and red.
Please note that additional shipping costs may be needed for this item.

 

 

Assorted hardware parts of the SGK1

 

 

 


 

 

 

Item #4 - SGK1 to SG3D SS Front polycarbonate piece only $5

This is the Front polycarbonate piece needed for the SGK1 guard only.
You can order this to replace one that has lost it's clarity.
You will receive two of these in this package. One is a spare.
Please note that additional shipping costs may be needed for this item.

 

 

Front Polycarbonate part

 

 

 


 

 

 

Item #5 - Clamp Assembly Without Anti-Kickback Pawls $25

This is the clamp part that mounts on the top of the splitters or the riving knives
and the Shark Guard subsequently rides on it. These parts are powder coated red.
Please note that additional shipping costs may be needed for this item.

 

 

Clamp Without Pawls Clamp Without Pawls Exploded View

 

 

 


 

 

 

Item #6 - Anti-Kickback Pawls and Springs Only $15

These are Anti-Kickback Pawls and the springs along with 4 button head cap screws

These will mount on the clamp to complete that assembly if pawls are desired.
The pawls are hardened steel and are powder coated red. If you order these with the clamp assembly above,
it will be fully assembled.
Please note that additional shipping costs may be needed for this item.

 

 

Delta Delta

 

 

 

 


 

 

 

Item #7 - Replacement SG3D SS Guard Covers Only $105

These are replacement covers. These are always the very latest version replacements.
They are complete fully assembled covers with all the cover hardware.
No splitters or clamps.
You can select the dust port size you would like installed on this replacement. Just send an email if you need a different size dust port and select the 4" version. We will model up and print any custom size.
Please note that additional shipping costs may be needed for this item.

 

Dust Port Size

 

 

3 Dust Port sizes - 2.5 in - 3 in - 4 in

 

 

 


 

 

 

Item #8 - Delta Splitter Mounting Brackets $30

You will not need this bracket if your saw already has one.

 

This bracket goes under the throat plate right behind the blade and mounts in the existing
threaded holes in the trunnion casting. This item comes with the necessary hardware and tools to mount the bracket
to the saw and subsequently the Shark Guard's splitters to this bracket.
The bracket is machined from a solid block of 6061 aluminum.
It fits both left and right tilt models and has lots of adjustment capability.
This does not come with the ratchet handle. That comes with splitter sets and blade guard kits.
This is installed just like the original Delta hardware, so consult the manual
or us if you have questions.

 

 

Leeway Workshop designed Delta replacement splitter mounting bracket

 

 

 


 

 

 

Item #9 - Tail Fin overhead mounting bracket kit $24

 

Information about this tail fin kit is on this webpage. It comes with two brushed stainless steel plates,
a large bolt and knob with washers.
Additional shipping may be required if ordered seperately.

 

 

Tail Fin Kit Shark Tail Fin Mounting Brackets

 

 

 


 

 

 

Item #10 - Replacement Splitters and Riving Knives

Replacement or stand alone splitters and riving knives can be ordered at each
models order page under Products

 

 

 


 

 

 

 

 

Item #11 - Light Kit $20

 

This is an add on light kit that uses a billet aluminum water resistant flash light. We have red and black. They use a single AA battery that we include. Lasts a very long time. This sheds a little light on the cuts in shop that have poor lighting like garage shops. The flash light can easily be removed from it's 3D printed mount for other uses like locating that dropped arbor nut.
This can be ordered with the guard or as a later addition to an existing guard. They will fit guards made from 2011 to current.
Additional shipping may be required if ordered seperately.

 

 

Delta ARK knife installation Delta ARK knife installation