Ryobi ZCTP

 

Current Lead Time:

Attention

The lead time for a new Shark Guard order is probably around 4 weeks.
This is due to order volume. Lead time does fluctuate. It is an estimate. Splitter or riving knife orders would be in about a week. We do have a small supply of these in stock now, so it would take just a little time to finish them out. Brackets and accesories may take about the same time. There is no need to use Paypal to get on the waiting list for Shark Guards. Just send an email with the model and options you would like. That will secure you a spot on our waiting list. I will confirm this via email.
I prefer this method. We could settle up just before your order ships. Feel free to ask about the status of your order or the availability of your particular model or possible lead time at anytime via email.

What's New:

New

 

We will be adding a new product very soon. It will be dust shoes for CNC routers. Stay tuned for information about those in the coming weeks if you are interested. We still have R&D in the works for other upgrades and products and table saw models. If you want to get on the waiting list for a Shark Guard, just send an email with the details of the order you would like.

Thank you for your interest.

Product Disclaimer

All of the items that you get from us are guaranteed to be of good quality, made from the best material available. If you aren't pleased with the condition of what we send you, you get your money back upon return. As with any aftermarket accessory,

YOU

must decide if these are the right additions or modifications for your comfort and safety. There is no way to use your table saw and be RISK FREE. The items that we make are merely safety aids. They will NOT PREVENT injury. They are a deterant to it.

Saws are very dangerous machines. Saws can KILL or MAIM you.

These accessories may not comply with rules and regulations in your area. You must decide for yourself whether to use these accessories or not. It is your safety that is at risk when using any power tool or accessory. Since we cannot be there for each and every setup and cut that you make, we cannot be held responsible for any accidents that occur as a direct result of any information or equipment that you receive from us or this website. You should familiarize yourself with saws and safety techniques in order to use it sucessfully.

Any responsibility for the use of this product(s) ultimately rests on your own shoulders.

Ordering anything from us is an acknowledgement that you understand these risks and responsibilties and that you are willing to accept the consequences of using them. If you are un-certain as to WHO is RESPONSIBLE for the setup and usage of any of these accessories,

DO NOT PURCHASE THEM.

Ryobi ZCTPs.

 

These are zero clearance throat plates for

 

Craftsman 21829, 22185, 22811, 27413...


Ryobi BT3000, BT3100, BT3100-1....


We are no longer offering these. I want to find better material and so far I have not found what I want. That may change in the future, but for now they are obsolete.

 

About the ZCTP Material.

 

This new red and white material is almost identical to "Sanatec" that we previously used. It just has two colors. Red white red. It is high density polyethylene or HDPE.
These plates use the 3 screw mounting method. This material is strong, is 1/2" thick, and is slightly textured. It provides a slick flush surface over the blade opening in the saw. These are milled to be ready to install on your saw using either the 10" blade or a smaller dado stack.

 

new ZCTP's

 

Install your red HDPE ZCTP

 

Click on the image below to see installation instructions for these ZCTPs.

 

Installing a red ZCTP

 

Payment Methods and Shipping Information



Please add the appropriate shipping costs to your Paypal cart below!

 

All packages require a shipping charge. Items from the replacement parts page will have the extra shipping costs included in the shopping cart. Canadian orders can use the cart item provided to bring Canadian shipping to the correct price. This same Cart item is valid for shipping to Mexico as well. If you have an unusual order that does not fit these categories, then just email me with the details and I can send a quote.

The only payment methods that We accept are Credit Card Payments through PayPal, US bank check or US money order or International Money Order in US Dollars. We cannot accept credit card information over the phone. Paypal takes the credit card information for us, so that we never see your card numbers or information.
You can E-mail for more details. If you are wanting to send a check or money order, here is our mailing address and other contact information. If you live somewhere other than the US or Canada and want to know the shipping, just email us with your address.

There has always been a lead time of weeks when you order. This is due to the popularity of the Shark Guard. It is also due to these being pretty much custom made to order and we have different styles, sizes and models in each weeks production batch. These require a lot of time to produce. We will turn your order around as fast as possible. It may be that we have the items you want on hand. Just be prepared for possible delay. You can contact us to get a rough estimate as to how long an order might take.

We always ship using USPS Priority or International Priority mail. You should receive an email from Stamps.com on the day that your order ships. It will have a delivery confirmation number and tracking information. It generally takes two days, but three days for some. We don't mind shipping to a PO Box. Special arrangements can be made for other shipping methods, but they are far more costly.

USPS Logo

 

Shipping costs to United States destinations

 

United States Shipping $18

 

This cart item is for shipping a Shark Guard package to a US destination. It includes Alaska, Hawaii, P.R. and territories as well as APO and FPO addresses. We ship these using Priority Mail.

 

 

USPS Logo

Shipping costs to Canada and Mexico

 

Canadian Shipping for Guard Packages $44

 

This is for those in Canada that would like to use Paypal to order the complete package. Add this to your cart and it will correct the site price for shipping to Canada. This is anywhere in Canada. This price will work for Mexico as well. I will need you to send me your phone number in an email. This is for the shipping slip. We ship these using Priority International.

 

 

USPS Logo

 

 

 

 

 

 

Welcome
Welcome
Welcome
themed object
Home of the Shark Guard