$300.00 – $355.00
Everything you need in one package! This setup includes the original SharkGuard dust collecting blade guard, clamp assembly, and splitter set custom made for each model saw. Our splitters are 3 different heights, two for attaching the guard to and one stubby for non through cuts. The different height splitters are for different thickness stock. This helps to cut off the air flow at the base of the guard and aids in dust collection – it attaches behind the blade below the throat plate.On Delta TS 200-350s, We attach a 3 different height splitter set to the OEM bracket on the rear rod of the saw.
You will no longer need the standard rear splitter mount so no need to make a hole in your outfeed table for most saws.
On all orders for the Splitter Mounted Guard Package, as well as other older saws with this type of setup, a quick release ratcheting handle is provided to replace the inner OEM splitter mounting bolt if applicable. Making swapping splitters for different thickness stock a tool free operation!
Please choose your dust port size and splitter thickness from the drop menus found below.
As always, fill out an inquiry when placing an order. You may order here, then send us an email to confirm your table saw model number so we know exactly what setup you will need. Model numbers for this package are below.
This Package does not come with anti-kickback pawls. They can be added to your cart separately.
Installation Instructions Here
COMPATIBLE MODELS
Carbatec TSC 10HB
Craftsman 101.02143
Craftsman 101.02161
Craftsman 113.27520
Craftsman 113.27521
Craftsman 113.27610
Delta 36-630
Delta 36-729
Delta TS200-350 Must have OEM bracket.
General 50-175
General 50-185
General 50260
King KC-10
King KC-11
King KCCX
All 10″ Powermatic
PM62
PM65
PM66
Description
Everything you need in one package! This setup includes the original SharkGuard dust collecting blade guard, clamp assembly, and splitter set custom made for each model saw. Our splitters are 3 different heights, two for attaching the guard to and one stubby for non through cuts. The different height splitters are for different thickness stock. This helps to cut off the air flow at the base of the guard and aids in dust collection – it attaches behind the blade below the throat plate. You will no longer need the standard rear splitter mount so no need to make a hole in your outfeed table. On Delta TS 200-350s, We attach a 3 different height splitter set to the OEM bracket on the rear rod of the saw.
On all orders for the Splitter Mounted Guard Package, as well as other older saws with this type of setup, a quick release ratcheting handle is provided to replace the inner OEM splitter mounting bolt if applicable. Making swapping splitters for different thickness stock a tool free operation!
Please choose your dust port size and splitter thickness from the drop menus found below.
As always, fill out an inquiry when placing an order. You may order here, then send us an email to confirm your table saw model number so we know exactly what setup you will need. Model numbers for this package are below.
This Package does not come with anti-kickback pawls. They can be added to your cart separately.
Installation Instructions Here
COMPATIBLE MODELS
Carbatec TSC 10HB
Craftsman 101.02143
Craftsman 101.02161
Craftsman 113.27520
Craftsman 113.27521
Craftsman 113.27610
Delta 36-630
Delta 36-729
Delta TS200-350 Must have OEM bracket.
General 50-175
General 50-185
General 50260
King KC-10
King KC-11
King KCCX
All 10″ Powermatic
PM62
PM65
PM66
Additional information
| Dust Port Size | No Dust Port, 2.5" Dust Port, 3.0" Dust Port, 4.0" Dust Port |
|---|---|
| Splitter Thickness | .090" Kerf, .105" Kerf, .120" Kerf |
