$190.00 – $250.00
The original, American made, flagship product. It can be configured to suit any saw type (blades over 14″ require R&D and may be subject to extended turn over time — contact us if your setup has a large blade). The guard attaches to your system via a splitter or riving knife that we also sell (depending on make and model) or via an overarm mount. Don’t hesitate to contact us to ensure that the correct package is coordinated to your needs!
Note: This is the guard only — you will also require a splitter/riving knife and clamp assembly, or just mount it via overarm mount using our Tailfin Kit. OSHA compliance requires your setup to also include anti-kickback pawls. All three are available for purchase as a package. The model numbers are listed under each package. Be sure to fill out an inquire before you place the order to ensure we get the right model for you.
This product was designed to meet a need — reducing the risk of lumber kickbacks during saw usage. When paired with the splitter (or riving knife) and anti-kickback pawls, your saw will have drastically reduced instances of this issue.
If that wasn’t enough, it also works as an excellent dust collector! Keep your work area as clean as your finished products.
Disclaimer — If your setup is equipped with a high CFM dust collection system, the 4″ dust port can cause the unit to function as a vacuum and may result in your work being pulled into the guard.
Pictured with our optional light kit.
Drop us a line with info on your current setup — our standout customer service will craft the perfect guard for you! Note — We’ll call to confirm all orders, since no one likes to delay getting the ideal product!
Description
The original, American made, flagship product. It can be configured to suit any saw type (blades over 14″ require R&D and may be subject to extended turn over time — contact us if your setup has a large blade). The guard attaches to your system via a splitter or riving knife that we also sell (depending on make and model) or via an overarm mount. Don’t hesitate to contact us to ensure that the correct package is coordinated to your needs!
Note: This is the guard only — you will also require a splitter/riving knife and clamp assembly, or just mount it via overarm mount using our Tailfin Kit. OSHA compliance requires your setup to also include anti-kickback pawls. All three are available for purchase as a package. The model numbers are listed under each package. Be sure to fill out an inquire before you place the order to ensure we get the right model for you.
This product was designed to meet a need — reducing the risk of lumber kickbacks during saw usage. When paired with the splitter (or riving knife) and anti-kickback pawls, your saw will have drastically reduced instances of this issue.
If that wasn’t enough, it also works as an excellent dust collector! Keep your work area as clean as your finished products.
Disclaimer — If your setup is equipped with a high CFM dust collection system, the 4″ dust port can cause the unit to function as a vacuum and may result in your work being pulled into the guard.
Pictured with our optional light kit.
Drop us a line with info on your current setup — our standout customer service will craft the perfect guard for you!
Additional information
| Weight | 104 oz |
|---|---|
| Dust Port | No Dust Port, 2.5" Dust Port, 3.0" Dust Port, 4.0" Dust Port |
| Blade Size | 10", 12", 14" |
Everyone loves what you guys are up too. Such clever work and exposure!
Keep up the superb works guys I’ve incorporated you guys to
my own blogroll.